Quadro SW-Version 4.1.x Manuale Utente Scaricare il pdf (Pagina 4)

Epygi Technologies Release Note Quadro2x 5.2.48, Edition 3

Vendor Model Software

Yealink SIP-T20P SW version: 9.50.0.50

Yealink SIP-T22P SW version: 7.50.0.50

Yealink SIP-T26P SW version: 6.50.0.50

Yealink SIP-T28P SW version: 2.50.0.50

Yealink VP-2009/VP-2009P 22.21.0.40/22.30.0.60

Aastra MBU400 Application version: 2.20

Telematrix IP550 Spectrum Plus SW version:1.7.252.253

Telematrix 3300IP SW version:1.7.249.248

Telematrix 9600IPMWD5 SW version: 1.7.249.248

Both mentioned documents are available at

www.epygi.com and can be found under the Channel’s

Portal.

Please Note: In the model’s list the Polycom phones with (*) sign are also presented as

Polycom-xx-Pre-3.3.0 due to backward incompatibility of UCSoftware 3.1.1 configuration. It is

recommended to use Pre-3.3.0 models with Application SIP software 3.2.2.0477.

2.4 Interaction with other Quadro SW releases

QuadroISDN or QuadroFXO external PSTN gateways used in the shared mode should have SW 5.1.12 or

higher to achieve maximum feature functionality with the Quadro2x SW 5.2.48.

QuadroFXS 16 Gateway should have SW 5.2.1 or higher for PnP configuration with the Quadro2x SW

5.2.48.

ActiveX Control SW 5.3.0 or higher should be used with 3pCC functions with the Quadro2x SW 5.2.48.

Auto Dialer SW 1.0.5 or higher should be used with the Quadro2x SW 5.2.48.

To use Quadro2x SW 5.2.48 with a 3pcc or Click2Dial application the “3pcc/Click2Dial Login Allowed”

checkbox should be enabled for each extension(s) using this feature.

PAGE 4 26-Dec-11

1 2 3 4 5 6 7 8 9 ... 23 24

Nessun commento

Quadro SW-Version 4.1.x Manuale Utente Pagina 4