Quadro Quadro2x2 Guida di Installazione Scaricare il pdf (Pagina 69)

QuadroM 32x/8L/26x/12Li/26xi Manual I: Installation GuideAppendix: Registering on Epygi SIP Server

Fig. I-75: Extensions Management - Edit Entry – SIP Settings page

• Enter the SIP registration number displayed in the column Ext# into the text field Reg-

istration User Name.

• In the Password field, enter the password you specified when registering at the SIP

server and confirm it in the field below.

• In Registration SIP Server, the selected SIP server address must be entered. If you

use the Epygi SIP server, you may leave the default entry sip.epygi.com.

• Most SIP server providers, including Epygi, use port 5060 as the Registration SIP

Port. You may leave the default entry as is.

• Select Registration on SIP Server if you want to establish and receive IP calls.

• Click the Save button to activate the settings.

Other settings of the extension might be also modified from Extensions Management –

Edit Entry page (refer to the Manual II - Administrator’s Guide).

Your settings will be verified, then after a few seconds the Extensions Management page

is updated with the changes as shown in the below example, Fig. I-76.

Fig. I-76: Extensions Management page

If you go back to Epygi’s SIP Server, you will find the value reg. for this number in the col-

umn Stat. Reg. This indicates that the Quadro has successfully registered the new number.

If this does not happen after a few minutes, again verify the SIP Number and passwords.

QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 69

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 75 76

Nessun commento

Quadro Quadro2x2 Guida di Installazione Pagina 69